Calculation time recorder K 875
Good value calculating time recorder with accumulative calculation from IN to OUT or start working to end working in case of flextime, breaksettings, several IN/OUTS per day, break-time setting, daily total and grand total printing yes or no, late-i and early-out mark, no result mark, maximal time-in function.
Time program options for fixed time, flexi-time or part time working. Working hours registration with part time total and cumulative total in 4 columns and32 lines on encoded time cards.
One or more IN/OUT registration per day in hours and minutes.
Illuminated display showing time, date, day of the week and print column.
Feed and eject of time cards with fully automatic side recognition and summer/winter time change-over. Immediately operational after connection of "intelligent" time clock to power supply.
Fixed time normal program (same daily work times, e.g. Monday to Thursday)
Fixed time - special program (short daily work times, e.g. Fridays)
Flexi-time normal program (e.g. start of work 07:00 to 07:30 a.m., end of work 4:00 to 5:00 p.m.)
Flexi-time special program (e.g. Wednesday: start of work 07:00 to 08:00 a.m., end of work 1:00 p.m. to 2:00 p.m.)
The effective daily working time runs from start of work between 7:00 and 8:00 a.m. and end of work between 1:00 p.m. and 2:00 p.m. The effective working time per day is the registration time between these times minus the programmed break time 9:00 - 9:15 a.m. Registration times before 7:00 a.m. or after 2:00 p.m. are not taken into account in the balance.
Part time normal program (any IN/OUT registration within a 24-hour day, with the same duration of work, valid for each employee)
Within a given day, each person can work for a maximum of e.g.3 hours at any time. If end of work is registered later than after 3 hours, this "extra time" will not be recorded in the balance. ...the K 875 registers, calculates and simplifies wage accounting
The K 875 model is ideal for recording the attendance time for a maximum of 50 people. Only the company-specific work times which are specified and which are relevant for the calculation, are recorded and continuously added up according to the calculation period.
Information on the time card1. Month registration
2. Date, alternative weekday Mon - Sun
3. Designation ! for late IN or early OUT (core time violation).
4. Designation * IN/OUT registration outside the programmed working time with fixed time programs.
This time is not taken into account in the balance.
5. Second IN/OUT registration per working day (e.g. interruption of work). In the event of several IN/OUT registrations, there are additional time balances for this working day.
Time approximation possibilities
Working time approximation:
The daily working time for fixed
time programs can be
approximated to 3, 5, 6, 10, 12,
15, 20 or 30 minutes, e.g. the
time balance can be rounded up
or down by a full ten minutes.
Approximation of the registration times:
The IN/OUT registration can be approximated to 3, 5, 6, 10, 12, 15, 20 or 30 minutes, e.g. the time balance is rounded up by a full five minutes for the IN registration and rounded down by a full five minutes for the OUT registration.